DIN 601
Hexagon Bolts without Hexagon Nut – with Hexagon Nut – Type g
English
1970
0.000
Detailed Information
This standard agrees essentially with the following ISO Recommendations issued by the International Organization for Standardization (ISO):
ISO/R 272-1968
ISO/R 733-7968
ISO/R 855-1968
ISO/R 888-1968

Download File
(Log in to download spec.)
Check out other specifications
1998
English
Grooved pins, one-third-length centre grooved (ISO 8742: 1997)
This international Standard specifies the characteristics of one-third-length centre grooved pins made of steel or austenitic stainless steel which have three equally spaced grooves impressed longitudinally on their exterior surface, with nominal diameter, d1, from 1,5 mm to 25 mm inclusive. The...
1983
English
MECHANICAL AND MATERIAL REQUIREMENTS FOR METRIC EXTERNALLY THREADED STEEL FASTENER
1.1 This standard covers the mechanical and material requirements for eight property classes of steel, externally threaded metric fasteners in sizes M1.6 through M36, inclusive, and suitable for use in automotive and related applications. 1.2 Products included are bolts, screws, studs, U-bolts, p...
1987
English
Prevailing torque type hexagon thin nuts with nonmetallic insert
This standard specifies requirements for M 3 to M 48 prevailing torque type hexagon nuts with nonmetallic insert, assigned to product grade A for sizes up to M 16 and product grade B for sizes over M 16. If, in special cases, nuts are to comply with specifications other than those given in this s...
2007
English
SURFACE DISCONTINUITIES OF NUTS
This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of inch-series nuts with nominal diameters 1/4 in. and larger.
2015
English
High-strength structural bolting assemblies for preloading Part 3: System HR — Hexagon bolt and nut assemblies
This European Standard specifies, together with EN 14399-1 and EN 14399-2, the requirements for assemblies of high-strength structural bolts and nuts of system HR suitable for preloaded joints with large widths across flats, thread sizes M12 to M36 and property classes 8.8/8 or 8.8/10 and 10.9/10...