DIN 7967
Self Locking Counter Nuts
English
1970
0.000
Detailed Information
When the self locking counter nuts have electrolytically deposited surface protection it is essential that suitable treatment methods should be adopted in order to prevent hydrogen embrittlement.
Download File
(Log in to download spec.)
Check out other specifications
1981
English
Specification for ISO metric screw threads — Part 1: Principles and basic data
This Part of this British Standard specifies the principles and basic data for single-start, parallel screw threads having the ISO basic profile for triangular screw threads. Data for 1,0 mm to 300 mm diameter threads is tabulated and Appendix B is included giving the information necessary to cal...
3.01
2000
English
QUENCHED AND TEMPERED STEEL BOLTS AND STUDS
This specification covers the chemical and mechanical requirements for two types of quenched and tempered steel bolts and studs for general applications where high strength is required.
1984
English
Fasteners – Technical delivery conditions – Design and dimensional accuracy
This standard supplements DIN ISO 4759 Part 1 and applies to those product standards (dimensional standards) in which DIN 267 Part 2 is referred to, e.g. with regard to the surface roughness of bolts, screws and nuts.
1983
English
Hexagon flange bolts
This standard specifies product grade A hexagon flange bolts with metric coarse screw thread or metric fine screw thread from 5 up to and including 20 mm nominal thread diameter. If, in special cases, specifications other than those listed in this standard are required, e.g. different nominal len...
1996
English
TEST PROCEDURE FOR THE PERFORMANCE OF METRIC NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS
This standard establishes a conformance test procedure for the performance of metric Nonmetallic Resistant Element Type Prevailing-Torque Screws (hereinafter called REPT screw), in nominal thread diameters M1.6 thru M36.