DIN 7968
Steel hexagon fit bolts for structural steel bolting, for supply with hexagon nuts
English
1999
0.000
Detailed Information
This standard specifies dimensions and technical delivery conditions for M12 to M30 steel hexagon fit bolts of product grade C for use in structural steel bolting. It also specifies the nuts and washers to be used.
Download File
(Log in to download spec.)
Check out other specifications
2011
English
Fasteners – Ends of parts with external ISO metric thread
This International Standard specifies the form and dimensions of ends of parts with external ISO metric screw thread (e.g. bolt, screw and stud ends) recommended for use. They apply to standardized or non-standardized threaded parts. For each end type, a symbol is specified and it is intended th...
2000
English
Hexagon weld nuts
This standard specifies requirements for sizes M3 to M16 coarse and fine pitch thread hexagon weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN EN ISO 898-1. Hexagon weld nuts with flange are specified in DIN 977.
1971
English
Lifting Eye Nuts
Lifting eye nuts must always be tightened so that they bear solidly on the surface they contact. Loads at right angles to the plane of the eye are prohibited. When a specific position in relation to an axis, edge or the like is specified for the lifting eye nut when screwed on, shims should be us...
1997
English
Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
1.1 This specification establishes allowable limits for the various types of surface discontinuities that may occur during the manufacture and processing of metric-series nuts with nominal diameters 5 mm and larger and inch-series nuts with nominal diameters 1/4 in. and larger. 1.2 The values sta...
1999
English
RIVET-TUBULAR, OVAL HEAD
DOUBLE SHEAR STRENGTH CARBON STEEL RIVETS 32,000 PSI MIN. BRASS RIVETS 35,000 PSI MIN. ALUMINUM RIVETS (2117) 26,000 PSI MIN. ALUMINUM RIVETS (5056) 24,000 PSI MIN. NICKEL ALLOY (MONEL) RIVETS 49,000 PSI MIN. COPPER RIVETS 24,000 PSI MIN. CORROSION RESISTANT STEEL RIVETS 65,000 PSI MIN.
1990
English
STAINLESS STEEL SOCKET SET SCREWS [METRIC]
1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SSS), sizes M1.6 through M24, having Property Classes A1·50 and A1·70. NOTE 1 - This specification is the metric companion of Specification F880.