DIN 8187
European type roller chains
English
1984
0.000
Detailed Information
This standard specifies dimensions and technical delivery conditions for European type roller chains which, together with their associated chain wheels, are predominantly used as power transmission elements between two or more shafts.
Download File
(Log in to download spec.)
Check out other specifications
1995
English
FORGED EYE BOLTS
This standard is limited to dimensions and capacities for forged threaded eyebolts intended primarily for lifting applications, and covers the following types and styles. Type 1, Plain pattern (straight shank) (see Table 1) Style A, Long length Style B, Short length Type 2, Shoulder pattern (se...
1998
English
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125: 1997, modified) English version of DIN EN 1666
This European Standard specifies the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d ≤ 16 mm and product grade B for d > ...
1992
English
Hexagon head bolts with metric fine pitch thread – Product grades A and B (ISO 8765 : 1988) English version of DIN EN 28 765
This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diameters d from 8 to 24 mm and nominal lengths, l, up to and including 10d or 150 mm, whichever is shorter, ...
2002
English
STUDS AND BENT BOLTS
This standard covers the general and dimensional requirements for various types of studs and bent bolts in nominal thread diameters 1-1/2 inches and smaller. Section A details double end studs (Table 1); Section B details interference-thread double end studs (Table 2); Section C details continuo...
1992
English
Hexagon head pipe plugs
This standard specifies dimensions and technical delivery conditions for pipe plugs which are intended to be screwed Into holes with parallel thread as specified in DIN 13 Part 12, DIN 158, DIN 3858 or ISO 228 Part 1. Since tightness is a function of pressure, temperature, the materials involved ...