DIN 914
Hexagon socket set screws with cone point – ISO 4027 modified
English
1980
0.000
Detailed Information
ISO 4027 specifies product grade A hexagon socket set screws with cone points with metric dimension and thread diameters from 1,6 up to and including 24 mm.
Download File
(Log in to download spec.)
Check out other specifications
1989
English
Square taper washers for high-strength structural bolting of steel I sections
Washers as specified in this standard are intended for use in GV and SL structural bolting of steel I sections in accordance with DIN 18 800 Part 1, together with DIN 6914 screws and DIN 6915 nuts.
1986
English
Knurled nuts
The following amendments have been made in comparison with the January 1971 edition a) The content of the standard has been editorially revised and aligned with the basic standards concerned b) The technical delivery conditions have been amended. c) The previous design m as specified in DIN 267 P...
1986
English
Tabular layouts of article characteristics for bolts, pins, rivets, and keys
This standard specifies tabular layouts, in accordance with DIN 4000 Part 1, for standardized and non-standardized bolts, pins, rivets, and keys.
1992
English
Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340
This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
1990
English
Metal washers – Technical delivery conditions
This standard specifies requirements for metal washers manufactured by stamping (punching) which thus exhibit inside and outside rollover and fracture (cf. DIN6930 Part 2 and DIN6932). It does not cover washers manufactured by machining (e.g. by drilling or turning). This standard specifies tole...
2011
English
Button head screws — Part 1: Hexagon socket button head screws
This International Standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this International ...