DIN EN 22340
Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
1998
English
Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
1.1 This specification covers the requirements for quenched and tempered alloy steel socket-head cap screws 1.6 mm through 48 mm in diameter having a minimum ultimate tensile strength of 1220 MPa.
1981
English
Retaining rings with lugs for use on shafts (external circlips)
For the purpose of this standard, retaining rings with lugs are circlips for use on shafts. They have an eccentric form and a number of lugs of equal depth uniformly distributed around the circumference. Circlips are suitable for retaining machine components which have non-square (radiused or cha...
2010
English
SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
1.1.1 This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering gaging procedures, formulas on which dimensional data are based, and a specification to assist in identify...
5.01
2005
English
Fasteners — Non-electrolytically applied zinc flake coatings
This Standard specifies requirements for thickness, corrosion resistance and mechanical and physical properties of non-electrolytically applied zinc flake coatings on steel fasteners with metric threads. It applies to both coatings with or without chromate. Coatings according to this Standard m...
1993
English
METRIC HEXAGON SOCKET HEAD SHOULDER SCREWS
1.1.1 This standard contains complete dimensional, mechanical, and performance requirements for Metric Series Hexagon Socket Head Shoulder Screws with nominal shoulder diameters from 6.5 mm to 25 mm recognized as American National Standard. Also included are appendices covering formulas for dimen...