ISO 273
Fasteners — Clearance holes for bolts and screws
English
1979
0.000
Detailed Information
This International Standard specifies clearance hole diameters for general purpose applications. These values result from bearing area calculations in connection with ISO bolt and nut product standards.
Download File
(Log in to download spec.)
Check out other specifications
2002
English
NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B
MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UNS S31700) AND 347 (UNS S34700), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. BRASS, ALLOY 462 (UNS C462...
1988
English
Fasteners – Acceptance inspection
1.1 This International Standard specifies the procedure to be followed by the purchaser at his acceptance inspection in order to decide whether a lot of fasteners may be accepted or rejected, when no other acceptance procedure has been agreed with the supplier at the time of ordering the fastener...
1983
English
Fasteners – Thread undercuts for external metric ISO threads
This International Standard lays down the form and dimensions of thread undercuts for bolts, screws and similar externally threaded products, recommended for use in those cases where an undercut is needed for threaded components such as plugs, unless otherwise specified in the appropriate product...
2005
English
TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE NUTS-INCH SERIES
This standard establishes a test procedure for nonmetallic resistant element prevailing-torque nuts having coarse threads, to determine their conformance with specified prevailing-torque requirements in nominal sizes #10 thru 1 in. intended for application temperatures of - 49°F to 250°F. Both pa...
2005
English
Hexalobular internal driving feature for bolts and screws
This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contour of the hexalobular internal driving feature is defined by the gauges specified in Tables 3, 4 and 5. A...