JIS B 0205-3
ISO general purpose metric screw threads — Part 3: Selected sizes for screws, bolts and nuts
English
2001
0.000
Detailed Information
This Standard specifies selected sizes for screws, bolts and nuts in the diameter range from 1 mm to 64 mm of ISO general purpose metric screw threads (M) having basic profile according to JIS B 0205-1.
Download File
(Log in to download spec.)
Check out other specifications
1990
English
Countersunk flat head screws – Part 2: Penetration depth of cross recesses
This part of ISO 7721 specifies the penetration depth of cross recesses of countersunk flat head screws for the two series 1 and 2 (deep and shallow, respectively).
2002
English
Geometrical Product Specifications (GPS) — Indication of surface texture in technical product documentation
This International Standard specifies the rules for the indication of surface texture in technical product documentation (e.g. drawings, specifications, contracts, reports) by means of graphical symbols and textual indications. It is applicable to the indication of requirements for surfaces by m...
2000
English
TRACK BOLTS
All types of track bolts and nuts used by the various railroads and electric railways in the United States and Canada were studied by the committee, and it is their belief that the recommended dimensions are based on sound engineering design to meet existing conditions, present usage, and where p...
2011
English
QUALITY ASSURANCE FOR FASTENERS
This quality focused Standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers. This Standard identifies four categories, recognizing that fastener users have widely varying requirements. The four categor...
2010
English
STEEL DRILL SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO STEEL STUDS FROM 0.033 IN. (0.84 mm) TO 0.112 IN. (2.84 mm) IN THICKNESS
1.1 This specification covers minimum requirements for steel drill screws for use in fastening gypsum panel products or metal plaster bases to steel members from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in thickness. 1.2 This specification also covers physical properties and test methods for d...