JIS B 1112
Cross-recessed head wood screws
English
1995
0.000
Detailed Information
This Japanese Industrial Standard specifies the cross-recessed head wood screws (Hereafter, referred to as “wood screws”.) made of steel wire, stainless steel and brass for general use.
Download File
(Log in to download spec.)
Check out other specifications
2005
English
Corrosion Protective Coatings Phosphate/Electro-Organic
This specification covers the basic requirements for a black corrosion protective coating which is produced by the use of the bulk electrodeposition process or, if the parts do not lend themselves to barrel processing, the parts may be racked prior to the electrodeposition process. The process in...
2000
English
Plain washers – Normal series – Product grade C
This International Standard specifies the characteristics of normal-series, product-grade-C plain washers in the 100 HV hardness class and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mm inclusive. Washers of hardness class 100 HV are suitable for -hexagon bolts and sc...
2008
English
NYLON INSERT LOCKNUTS (INCH SERIES)
This Standard covers the complete general, dimensional, mechanical, and performance data for carbon steel, inch series nylon insert locknuts of property grades NE2, NE5, and NE8 designated as American National Standard. The inclusion of dimensional data in this Standard is not intended to imply ...
1992
English
Full-length parallel grooved pins, with chamfer (ISO 8740 : 1986) English version of DIN EN 28 740
This International Standard specifies the characteristics of full-length parallel grooved pins with chamfer which have three equally spaced grooves impressed longitudinally on their exterior surface and a pilot to facilitate insertion, with metric dimensions and nominal diameter, d1, from 1,5 to ...
2015
English
High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers
This European Standard specifies, together with EN 1 4399-1 and EN 1 4399-2, hardened and tempered chamfered plain washers with chamfer intended for bolting assemblies with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive. Washers according...
1987
English
Conical spring washers for bolt/nut assemblies
Conical spring washers covered in this standard are deemed to be spring washers designed for use for bolt/nut assemblies involving bolts of property classes 8.8 to 10.9 as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assemblies worki...