Beiblatt 1 zu DIN 267 Teil 2

Mechanische Verbindungselemente – Technische Lieferbedingungen – Ausführung und Maßgenauigkeit – Beispiele für Toleranzangaben

German 1984
0.000
DIN
Detailed Information

In den nachfolgenden Bildtafeln sind – nach den Produktklassen A, B und C (bisher Ausführungen m, mg und g) geordnet – die aus DIN ISO 4759 Teil 1 und den bisherigen Festlegungen in DIN 267 Teil 2, Ausgabe April 1968, entnommenen Maßtoleranzen den verschiedenen DIN-Normen über Schrauben und Muttern zugeordnet. Mit diesen Bildtafeln soll die Anwendung von DIN ISO 4759 Teil 1 und DIN 267 Teil 2 erleichtert werden.

Download File
(Log in to download spec.)

Check out other specifications

IFI
IFI-124
2007
English

TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS

This standard establishes a conformance test procedure for the performance of Nonmetallic Resistant Element Prevailing-Torque Screws (hereinafter called "REPT screw"), in nominal screw sizes No [...]
DIN
DIN 6916
1989
English

Round washers for high-strength structural steel bolting

The washers specified in this standard are intended for use in GV and SL structural steel bolting in accordance with DIN 18 800 Part 1, together with DIN 6914 bolts and DIN 6915 hexagon nuts.
ISO
ISO 724
1993
English

ISO general-purpose metric screw threads – Basic dimensions

This International Standard specifies the basic dimensions, in millimetres, of ISO metric screw threads in accordance with ISO 261. The values refer to the basic profile in accordance with ISO 68.
ISO
ISO 2902
1977
English

ISO metric trapezoidal screw threads – General plan

This International Standard specifies a series of diameter and pitch combinations for ISO metric trapezoidal screw threads having the basic profile according to ISO 2901.
BS EN
BS EN 14399-4
2015
English

High-strength structural bolting assemblies for preloading Part 4: System HV — Hexagon bolt and nut assemblies

This European Standard specifies together with EN 14399-1 and EN 14399-2, the requirements for assemblies of high-strength structural bolts and nuts of system HV suitable for preloaded joints w [...]
ASME
ASME B18.6.2
2005
English

SLOTTED HEAD CAP SCREWS, SQUARE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)

This Standard covers the complete general and dimensional data for the various styles of slotted head cap screws and square head and slotted headless set screws recognized as “American National [...]
ASTM
ASTM A563M
1997
English

Standard Specification for Carbon and Alloy Steel Nuts [Metric]

1.1 This specification covers chemical and mechanical requirements for eight property classes of hex and hex-flange carbon and alloy steel nuts for general structural and mechanical uses on bol [...]
DIN
DIN 59370
1978
English

Steel Sections – Bright Square Edge Equal Angles – Dimensions, Permissible Deviations, Weights

This Standard applies to bright square edge angles with equal legs, in the dimension range specified in Table 1 and made from the steel grades quoted in Section 5.
JIS
JIS B 0216
1987
English

Metric trapezoidal screw threads

This Japanese Industrial Standard specifies the combined nominal diameters and pitches, designation of screw threads, basic profiles, formulae and basic dimensions of the metric trapezoidal scr [...]