ASTM A687

Standard Specification for High-Strength Nonheaded Steel Bolts and Studs

English 1993
0.000
ASTM
Detailed Information

1.1 This specification covers the chemical and mechanical requirements for quenched and tempered steel nonheaded bolts and studs with enhanced Charpy V-notch impact properties for anchorage and other purposes. The material shall be alloy steel as described in Table 1 and is limited to 5/8 to 3 in. (15.875 to76 mm) inclusive, in nominal diameter.
1.2 This specification does not apply to mechanical expansion anchors for concrete or to powder-activated nails or studs for concrete or steel.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for
information only.

Download File
(Log in to download spec.)

Check out other specifications

ASME
ASME B18.2.9
2010
English

STRAIGHTNESS GAGE AND GAGING FOR BOLTS AND SCREWS

1 SCOPE This Standard describes a gage and procedure for checking bolt or screw straightness at maximum material condition (MMC) and provides default limits when not stated in the applicable product standard. 2 COMPARISON WITH ISO 4759-1:2000 This Standard uses an adjustable gage, instea […]
ASME
ASME Draft Revision B18.18.1
2002
English

INSPECTION AND QUALITY ASSURANCE FOR GENERAL PURPOSE FASTENERS

This standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and accessories or associated parts. Provisions are included for sampling plans and record keeping. Included in this plan are fasteners for general purpose applications, such as those where h […]
ASTM
ASTM F880M
1997
English

Standard Specification for Stainless Steel Socket Set Screws [Metric]

1.1 This specification covers the requirements for austenitic grade stainless steel socket set screws (SS5), sizes M 1.6 through M 24, having Property Classes A 1-50 and A 1-70.
DIN
DIN 8195
1977
English

Design and selection of chain drives

1.1 This standard contains capacity rating charts and gives recommendations on the selection of chain drives, composed of roller chains and chain wheels conforming to DIN 8187 and DIN 8188, and of chain wheels with toothing as specified in DIN 8196 Part 1.
JIS
JIS B 1101
1996
English

Slotted head screws

This Japanese Industrial Standard specifies the steel slotted head screws (hereafter, referred to as “steel screws") , stainless steel slotted head screws (hereafter referred to as “stainless steel screws”) and nonferrous metal slotted head screws (hereafter referred to as “nonferrous met […]
DIN
DIN 7999
1983
English

High strength hexagon fit bolts with large widths across flats for structural steel bolting

This standard specifies high strength hexagon fit bolts with large widths across flats. Fit bolts are intended for use in structural steel bolting (GVP bolting or SLP bolting). They may only be used together with hexagon nuts complying with DIN 6915 and with washers complying with DIN 691 […]