DIN EN 1665
Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997
German
1998
0.000
Detailed Information
Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.
Download File
(Log in to download spec.)
Check out other specifications
1987
English
Spring lock washers with square ends or tang ends
Spring lock washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assembl […]
1971
English
Cross Recessed Countersunk (Oval) Head Screws (Countersunk Heads according to ISO)
Normally these screws are made in the sizes for which weight details are given. If the screws are to be supplied with captive washer components, the designation must be augmented according to DIN 6900. Recesses and recess penetration gauges according to DIN 7962.
1995
English
T-Slot bolts
This Japanese Industrial Standard specifies steel-made T-slot bolts (hereafter, referred to as "bolts") to be used mating with T slots (JIS B 0952). The strength class 6T of mechanical properties specified in this Standard will be withdrawn on April 1, 1999.
1998
English
Mechanical properties of steel nuts
This Japanese Industrial Standard specifies mechanical properties of steel nuts.
1983
English
Prevailing torque type all-metal hexagon nuts, style 1 – Property classes 5, 8 and 10
This International Standard specifies the characteristics of prevailing torque type all-metal hexagon nuts with thread sizes from M 5 to M 36 inclusive, in property classes 5, 8 and 10, and product grades A (d ≤ M 16) and B (d > M 16).
2008
English
CONTINUOUS AND DOUBLE-END STUDS (INCH SERIES)
1.1.1 This Standard covers the complete dimensional and general data for continuous thread and double-end inch-dimensioned studs recognized as American National Standard. The following configurations are covered: continuous thread stud: studs that are threaded over their complete length. […]