DIN EN 1665
Sechskantschrauben mit Flansch – schwere Reihe – Deutsche Fassung EN 1665 : 1997
German
1998
0.000
Detailed Information
Diese Europäische Norm legt Eigenschaften für Sechskantschrauben mit Flansch, schwere Reihe, mit Gewinde von M5 bis M20 und mit Festigkeitsklassen 8.8, 10.9 und A2-70 fest.
Download File
(Log in to download spec.)
Check out other specifications
2000
English
CARBON STEEL EXTERNALLY THREADED STANDARD FASTENERS
1.1 This specification covers the chemical and mechanical requirements of three grades of carbon steel bolts and studs, in sizes 1/4 in. through 4 in. The fasteners are designated by "Grade" denoting tensile strength and intended use, as follows: Grade A Bolts and studs having a minimum tensile s...
2004
English
Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
1.1 This specification covers hot-wrought and cold-finished quenched and tempered alloy steel bars. 1.2 Hot-wrought bars are available in three strength level classes designated BB, BC, and BD, and cold-finished bars in two strength level classes designated BB and BC. The bars are available in th...
1994
English
Eyenuts
This Japanese Industrial Standard specifies eyenuts for general lifting work of machinery (hereafter referred to as "nuts").
1998
English
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125: 1997, modified) English version of DIN EN 1666
This European Standard specifies the characteristics of prevailing torque type hexagon nuts with flange, with non-metallic annular insert and metric fine pitch thread with nominal thread diameters d from 8 mm up to and including 20 mm, in product grade A for d ≤ 16 mm and product grade B for d > ...
1998
English
MECHANICAL AND QUALITY REQUIREMENTS FOR TAPPING SCREWS
1.1 This SAE Recommended Practice covers the mechanical and quality requirements for steel tapping screws used in automotive and related industries. It does not apply to corrosion resistant (stainless) steel screws. (Dimensional requirements for most types of screws mentioned herein are covered i...
2008
English
NONFERROUS NUTS FOR GENERAL USE
1.1 This specification covers the requirements for commercial wrought nonferrous nuts 0.250 to 1.500 in. inclusive in diameter in a number of alloys in common use and intended for general service applications. 1.2 Applicable bolts, cap screws, and studs for use with nuts covered by this specific...