DIN EN 20898-1

Mechanical properties of fasteners – Bolts, screws and studs (ISO 898-1 : 1988) English version of DIN EN 20 898 Part 1

English 1992
5.001
DIN EN
Detailed Information

This part of ISO 898 specifies the mechanical properties of bolts, screws and studs when tested at room temperature (see ISO 1) . Properties will vary at higher and lower temperature.

Download File
(Log in to download spec.)

Check out other specifications

ISO
ISO 7380
1983
English

Hexagon socket button head screws – Metric series

This International Standard lays down the specification for hexagon socket button head screws with thread sizes from M 3 to M 16 inclusive.
JIS
JIS B 1012
1986
English

Cross recesses for screws

This Japanese Industrial Standard specifies the shape, dimensions and measuring method for cross recesses formed on the heads of machine screws, wood screws, tapping screws and the like, hereinafter referred to as the "cross recess".
JIS
JIS B 1044
2001
English

Fasteners—Electroplated coatings

This Standard specifies dimensional requirements for electroplated fasteners of steel or copper alloy. It specifies coating thicknesses and gives recommendations for hydrogen embrittlement relief for fasteners with high tensile strength or hardness and for surface-hardened fasteners. Thi […]
JIS
JIS B 1181
2004
English

Hexagon nuts and hexagon thin nuts

This Japanese Industrial Standard has been prepared based on the third edition of ISO 4032 : 1999 Hexagon nuts, style 1-Product grades A and B published in 1999, the second edition of ISO 4033 Hexagon nuts, style 2-Product grades A and B published in 1999, the third edition of ISO 4034 He […]
ISO
ISO 898-5
1980
English

Mechanical properties of fasteners – Part 5 : Set screws and similar threaded fasteners not under tensile stresses

This International Standard specifies the mechanical properties of set screws and similar fasteners not under tensile stresses in the range from 1,6 up to and including 39 mm thread diameter which are made of carbon steel or alloy steel.
DIN
DIN 6926
1983
English

Prevailing torque type hexagon nuts with flange and with non-metallic insert

This standard gives specifications for prevailing torque type hexagon nuts with flange and with non-metallic insert, with metric thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this […]