DIN EN 22340
Clevis pins without head (ISO 2340 : 1986) English version of DIN EN 22 340
English
1992
0.000
Detailed Information
This International Standard specifies the characteristics of clevis pins without head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive.
Download File
(Log in to download spec.)
Check out other specifications
2015
English
High-strength structural bolting assemblies for preloading Part 1: General requirements
This European Standard specifies the general requirements for bolt/nut/washer(s) assemblies for high-strength structural bolting, which are suitable for preloading. The intended use of bolting assemblies in accordance with this European Standard is structural metallic works. NOTE 1 High-strengt...
2000
English
Technical drawings – Edges of undefined shape – Vocabulary and indications
This International Standard defines the terms defining the states of edges and specifies rules for representing states of edges of undefined shape in technical drawings. The proportions and dimensions of the graphical symbols to be used are also specified. In cases where the geometrically defin...
1993
English
Rivets – Technical delivery conditions
This standard specifies technical delivery conditions, test methods and acceptance conditions for all types of standardized rivets (except for blind rivets). These specifications are generally applicable but may deviate from the specifications of other relevant product standards, In which case th...
2011
English
QUALITY ASSURANCE FOR FASTENERS
This quality focused Standard establishes in-process and final inspection requirements for fastener products as well as a receiving inspection plan for fastener purchasers. This Standard identifies four categories, recognizing that fastener users have widely varying requirements. The four categor...
2009
English
Mechanical properties of corrosion-resistant stainless steel fasteners — Part 2: Nuts
This part of ISO 3506 specifies the mechanical properties of nuts made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 °C to 35 °C. Properties vary at higher or lower temperatures.
2012
English
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
This part of ISO 898 specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Nuts conforming to the requirements of this part of ISO 898 are evaluated at that ...