ISO 2904
ISO metric trapezoidal screw threads – Basic dimensions
English
1977
5.001
Detailed Information
This International Standard specifies the basic dimensions for ISO metric trapezoidal screw threads according to ISO 2902.
The values refer to the basic profiles according to ISO 2901.

Download File
(Log in to download spec.)
Check out other specifications
2002
English
NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B
MAGNETIC PERMEABILITY: CORROSION RESISTANT STEEL FASTENERS SHALL HAVE A MAGNETIC PERMEABILITY OF 2.00 MAXIMUM (AIR = 1.00) AT A FIELD STRENGTH OF H = 200 OERSTEDS USING A MAGNETIC INDICATOR IN ACCORDANCE WITH MIL-I-17214.
2008
English
SERRATED HEX FLANGE LOCKNUTS 90,000 psi (INCH SERIES)
This Standard covers the general, dimensional, and mechanical performance requirements for low strength carbon steel, case hardened, regular and large serrated flange locknuts (inch series), recognized as American National Standard.
2000
English
Hexagon socket head cap screws
This Standard specifies the characteristics of hexagon socket head cap screws with threads from M1.6 up to and including M64 and product grade A. Gauging of hexagon sockets is specified in Annex A. For approximate masses of screws see Annex B. If, in special cases, specifications other than tho...
1976
English
Testing of Steel and Cast Steel – Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength
The conversion table In this Standard applies - to hardness values determined according to the following standards: ~DIN 50 103 Part 1 and Part 2 (Rockwell) ~DIN 50 133 Part 1 (Vickers) and ~DIN 50 351 (Brinell) - to tensile strength values determined according t.o ~DIN 50145 and - to values of H...
1.01