ISO 2904
ISO metric trapezoidal screw threads – Basic dimensions
English
1977
5.001
Detailed Information
This International Standard specifies the basic dimensions for ISO metric trapezoidal screw threads according to ISO 2902.
The values refer to the basic profiles according to ISO 2901.
Download File
(Log in to download spec.)
Check out other specifications
1986
English
Round nuts with drilled holes in one face
Round nuts with drilled holes in one face are parts generally made of steel, stainless steel or non-ferrous metals, which are designed to be used for various purposes, as for instance in electrical engineering. They can be tightened by means of a pin type face wrench as specified m DIN 3116 and a...
1991
English
Hexagon nuts with a height of 1,5 d
This standard specifies hexagon nuts designed for use with bolts in assemblies that will be frequently disassembled and reassembled. They are provided with a spherical bearing face which, in conjunction with a 120° countersink or a conical seat as specified in DIN 6319, permit any displacements o...
1995
English
Hexagon head screws with captive washer
This Japanese Industrial Standard specifies steel and brass hexagon head screws with captive washer for general purposes. The hexagon head screw with captive washer is a hexagon head screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent the di...
1985
English
Cast steels for general engineering purposes – Technical delivery conditions
1.1 This standard applies to the grades of cast steel listed in table 1 with specified minimum values for the mechanical properties at ambient temperature. The castings made from these steels are predominantly used at temperatures between -10 and + 300°C. 1.2 See DIN 17 182 for cast steel grades...
2002
English
STRUCTURAL BOLTS, STEEL, HEAT TREATED, 120/105 KSI MINIMUM TENSILE STRENGTH
1.1 This specification covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less, and 105 ksi for sizes over 1.0 to 1-1/2 in., inclusive. 1.2 The bolts are intended for use in structural connections. These co...