DIN 6799

Lock washers (retaining washers) for shafts

English 1981
0.000
DIN
Detailed Information

Lockwashers within the context of this standard are retaining washers for the axial retention of components on shafts. They are inserted radially in grooves and enclose the groove base under spring tension with segments.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 267-10
1988
German

Mechanische Verbindungselemente – Technische Lieferbedingungen – Feuerverzinkte Teile

Diese Technischen Lieferbedingungen gelten für mechanische Verbindungselemente {im wesentlichen Schrauben und Muttern) mit Regelgewinde M 6 bis M 36 und mit Zinküberzügen durch Feuerverzinken s [...]
ANSI
ANSI B18.2.4.4M
1993
English

METRIC HEX FLANGE NUTS

1.1 This standard covers the complete general and dimensional data for metric hex flange nuts recognized as American National Standard. 1.2 The inclusion of dimensional data in this standard is [...]
DIN
DIN 7995
1984
English

Cross recessed raised countersunk head wood screws

In previous editions of this standard, thread sizes 2,4 and 2,7 were included. In the March 1975 edition of this standard, these sizes were excluded from use in new designs. Because of the cont [...]
JIS
JIS B 1107
2004
English

Hexalobular socket head screws

This Standard specifies the characteristics of hexalobular socket head screws in product grades A and with nominal thread sizes from M2 up to and including M10. If other specifications than th [...]
DIN
DIN 7970
1984
English

Threads and thread ends for tapping screws (modified version of ISO 1478)

This standard specifies the thread and thread ends of tapping screws of thread sizes from ST 1,5 up to and including ST 9,5.
DIN
DIN 580
1972
English

Lifting Eye Bolts

The February 1956x edition of DIN 580 Part 1 specified Siemens-Martin steel St 34 or C 15 as materials for the manufacture of lifting eye bolts, at manufacturer's choice. The present new editio [...]
DIN
DIN 910
1992
English

Heavy-duty hexagon head screw plugs

This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, or I [...]
Custom
John Deere | JDM F21
2012
English

Fasteners, Hydraulic Connectors, Hose Fittings and Tube Assemblies — Specification for Zinc-Nickel Electroplated Coating Requirements

1.1 JDM F21 specifies the requirements for electroplated zinc nickel coating for fasteners (see note 1) or hydraulic connectors and hose fittings made of steel or of copper alloy. JDM F21 speci [...]
JIS
JIS B 1055
1995
English

Tapping screws—Mechanical properties

This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together [...]