DIN 6900-4

Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer

English 1990
0.000
DIN
Detailed Information

This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated lock washer. Serrated lock washers are mainly designed to provide electric contact between components coated with varnish, anti-corrosive agents or similar materials, by the tang ends of the washers piercing the coating when such components are joined. For such applications, the effectiveness of serrated lock washers shall be verified in accordance with the relevant DIN VDE Standards. If the washer is intended to prevent bolted connections working loose, this function shall be checked separately.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM F738M
1997
English

Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

1.1 This specification covers the chemical and mechanical requirements for stainless steel metric bolts, screws, and studs with nominal thread diameters M1.6 through M36, and intended for u […]
ANSI
ANSI B18.16.2M IFI Comment
1995
English

TORQUE-TENSION TEST REQUIREMENTS FOR PREVAILING-TORQUE TYPE STEEL METRIC HEX NUTS AND HEX FLANGE NUTS

Unfortunately, the values needed to complete this standard are not yet agreed to. ISO standard 2320 provides values which make no distinction between normal and low friction and are not acc […]
ASTM
Abstract of ASTM F879
2002
English

STAINLESS STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS

1.1 This specification covers the chemical and mechanical requirements for stainless steel inch hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws with nominal threa […]
DIN
DIN 86102
1965
English

Screwed Ends, Tapped Holes for Pipe Unions, Armatures and Plugs with Whitworth Pipe Thread – Design Sheet for Shipbuilding

This Standard contains a selection from DIN 3852 Sheet 2 for the shipbuilding industry with some diverging or complementary data.
DIN EN
DIN EN 28749
1992
English

Determination of shear strength of pins (ISO 8749 : 1986) English version of DIN EN 28 749

This International Standard specifies the test method for shear testing of metallic pins with nominal diameters from 0,8 to 25 mm inclusive.
DIN
DIN 74361-2
2008
German

Scheibenräder für Kraftwagen und Anhängefahrzeuge – Teil 2: Befestigungselemente für Bolzenzentrierung

Diese Norm gilt für Befestigungselemente von bolzenzentrierten Scheibenrädern aller Art an Kraftwagen und Anhängefahrzeugen.
ASTM
Abstract of ASTM A490M
1993
English

HIGH-STRENGTH STEEL BOLTS, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS [METRIC]

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inclusive. These bolts are intended for […]
DIN
DIN 7967
1970
English

Self Locking Counter Nuts

When the self locking counter nuts have electrolytically deposited surface protection it is essential that suitable treatment methods should be adopted in order to prevent hydrogen embrittlement.
DIN
DIN 918 Supplement 3
1999
English

Overview of European Standards for fasteners

This Supplement provides information relating to DIN 918 but no additional standard specifications.