DIN 74361-2
Disc wheels for motor vehicles and trailers – Fasteners for stud centring
English
1982
0.000
Detailed Information
This standard specifies requirements for fasteners for stud-centred disc wheels on motor vehicles and trailers.
Any necessary draft on the hexagon shall be within the tolerance on the width across flats.
Download File
(Log in to download spec.)
Check out other specifications
2001
English
Mechanical properties of corrosion-resistant stainless-steel fasteners— Part 1 : Bolts, screws and studs
This part of JIS B 1054 specifies the mechanical properties of bolts, screws and studs made of austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested over an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperatures....
2022
English
Specification for Zinc Flake Coatings for Bolted Joints
1.1 JDM F25 specifies requirements for black color appearance, hexavalent chromium-free zinc flake coatings with a 0.09-0.16 coefficient of friction (CoF) requirement. Two levels of corrosion resistance are available, 240 hour and 960 hour. Note 1 JDM F25 uses black color appearance as a visual i...
1991
English
Bolts, screws and studs — Nominal lengths, and thread lengths for general purpose bolts
This Japanese Industrial Standard specifies nominal lengths to be applied to external thread parts of bolts, machine screws, etc. to be used generally and thread lengths for general purpose bolts having body without screw threads at shank (for example, hexagon head bolts with nominal diameter bod...
2005
English
SLOTTED HEAD CAP SCREWS, SQUARE HEAD SET SCREWS, AND SLOTTED HEADLESS SET SCREWS (INCH SERIES)
This Standard covers the complete general and dimensional data for the various styles of slotted head cap screws and square head and slotted headless set screws recognized as “American National Standard." Also included are appendices covering thread runout sleeve gages for cap screws, protrusion ...
2004
English
Hexalobular socket head cap screws
This Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A. If, in special cases, specifications other than those listed in this International Standard are required, they should be selected from existing...
1966
English
Spring Washers with Safety Ring
The surface of the spring washer and of the safety ring must be smooth and free from scale and burr. The spring washers must be coiled with constant pitch and without any kinks (with the exception of the barbing of the ends). The ends of the spring washer which bite into the parent material must...