JIS B 0262

Inspection method for taper screw gauges

English 1989
0.000
JIS
Detailed Information

This Japanese Industrial Standard specifies the inspection method of taper screw gauges for pipes specified in JIS B 0253 (hereafter referred to as the “taper screw gauges”).

Furthermore, the inspection method for the taper screw gauges specified in Appendix of JIS B 0253 is specified in Appendix.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 124
1993
English

Steel round head rivets with nominal diameters from 10 to 36 mm

This standard specifies dimensions of steel round head rivets with nominal diameters from 10 to 36 mm.
JIS
JIS B 1056
2000
English

Prevailing torque type steel hexagon nuts— Mechanical and performance properties

This Standard specifies the mechanical and performance properties for prevailing torque type steel hexagon nuts (including those with flange) when tested over an ambient temperature range of 10 [...]
DIN
DIN 940
1995
English

Studs – with a length of engagement equal to about 2,5 d

This standard specifies dimensions and technical delivery conditions for studs intended for use mainly in light metals of low strength. As specified in DIN 267-2, the stud end thread shall be p [...]
NASM
NASM 24693
1999
English

SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100°, CROSS RECESSED, UNC-2A AND UNF-2A

MATERIAL CODE: "A" BEFORE DASH NUMBER - ANODIZED, ALUMINUM ALLOY SCREW. "B" BEFORE DASH NUMBER - UNCOATED, BRASS SCREW. "BB" BEFORE DASH NUMBER - BLACK CHEMICAL FINISH, BRASS SCREW. "C" BEFORE [...]
ISO
ISO 10664
2005
English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contou [...]
DIN
DIN 928
2000
English

Square weld nuts

This standard specifies requirements for sizes M4 to M16 coarse and fine pitch thread square weld nuts of product grade A, for use with bolts of property classes below 8.8 as specified in DIN E [...]
ASME
ASME B1.20.5
2004
English

GAGING FOR DRYSEAL PIPE THREADS (INCH)

The scope of this Standard is to provide information regarding practical dryseal thread inspection methods and commonly used gages for production evaluation purposes. All dimensions are in inch [...]
SAE
SAE J81
1997
English

THREAD ROLLING TAPPING SCREWS

This standard covers requirements for thread rolling screws suitable for use in general engineering applications. (It is intended that "thread rolling" screws have performance capabilities beyo [...]
JIS
JIS B 1091
2003
English

Fasteners—Acceptance inspection

This Standard specifies the acceptance inspection procedure that the purchaser of fasteners must follow in order to determine whether a lot of fasteners will be accepted or rejected in cases wh [...]