ASME B18.2.3.4M

METRIC HEX FLANGE SCREWS

English 1999
0.000
ASME
Detailed Information

1.1 This standard covers the complete dimensional and general data for metric series hex flange screws recognized as American
National Standard.
1.2 The inclusion of dimensional data in this standard is not intended to imply that all products described are stock production items. Consumers should consult with suppliers concerning availability of products.

Download File
(Log in to download spec.)

Check out other specifications

DIN
DIN 6900-4
1990
English

Screw and washer assemblies – Coarse threaded screws with captive serrated lock washer

This standard specifies requirements for screw and washer assemblies consisting of a M2,5 to M10 screw with flat bearing face, assigned to a property class below 5.8, and a captive serrated loc [...]
DIN
DIN 268
1974
English

Tangential Keys and Tangential Keyways for Alternating Shock Loads

The present Standard corresponds in substance to the ISO Draft ISO/DIS 3117-1973 Tangential keying While it is true that this ISO Draft deals only with tangential keys and keyways for constant [...]
ASTM
Abstract of ASTM A193/A193M
2010
English

ALLOY STEEL AND STAINLESS STEEL BOLTING FOR HIGH TEMPERATURE OR HIGH PRESSURE SERVICE AND OTHER SPECIAL PURPOSE APPLICATIONS

This specification covers alloy and stainless steel bolting for pressure vessels, valves, flanges, and fittings for high temperature or high pressure service, or other special purpose applicati [...]
ASTM
Abstract of ASTM B696
1991
English

COATINGS OF CADMIUM MECHANICALLY DEPOSITED ON IRON AND STEEL

1.1 General - This specification covers the requirements for a coating of cadmium mechanically deposited on metal products. The coating is provided in various thicknesses up to and including 12 [...]
ISO
ISO 965-1
1980
English

ISO general purpose metric screw threads – Tolerances – Part 1 : Principles and basic data

This International Standard specifies a tolerance system for screw threads conforming to ISO 261, ISO general purpose metric screw threads - General plan. The tolerance system refers to the bas [...]
IFI
IFI-166
2007
English

INSPECTION PROCEDUR FOR THREAD NICKS – INCH SERIES

This standard establishes an inspection procedure to determine acceptability of thread nicks as they relate to screw thread assemblability. This procedure is intended to be used for bolts, scre [...]
DIN
DIN 1151
1973
English

Round plain head and countersunk head wire nails

Wire nails shall be made of steel (grade at manufacturer's discretion) and have a bright (bk), galvanized (zn) or metallized (me) finish.
DIN
DIN 7982
1984
English

Cross recessed countersunk head tapping screws

DIN 6901 shall apply for the designation of tapping screws with captive washer components (tapping screw assemblies). DIN 4000 - 2 - 1 tabular layout of article characteristics shall apply for [...]
DIN EN
DIN EN 28752
1993
English

Slotted spring-type straight pins (ISO 8752: 1987) English version of DIN EN 28 752

This International Standard specifies the characteristics of slotted spring-type straight pins with metric dimensions and nominal diameters, d1, from 1 to 50 mm Inclusive.