ASTM F594

STAINLESS STEEL NUTS

English 2009
0.000
ASTM
Detailed Information

This specification covers the requirements for stainless steel nuts 0.25 to 1.50 in., inclusive, in nominal diameter in a number of alloys in common use and intended for service applications requiring general corrosion resistance.

Download File
(Log in to download spec.)

Check out other specifications

ASTM
ASTM C1002
2007
English

STEEL SELF-PIERCING TAPPING SCREWS FOR THE APPLICATION OF GYPSUM PANEL PRODUCTS OR METAL PLASTER BASES TO WOOD STUDS OR STEEL STUDS

1.1 This specification covers steel self-piercing tapping screws for use in fastening gypsum panel products and metal plaster bases to cold-formed steel studs less than 0.033 in. (0.84 mm) in thickness and wood members and for fastening gypsum panel products to gypsum board. 1.2 This specificati...
DIN
DIN 6918
1990
English

Square taper washers for high-strength structural bolting of steel channel sections

Washers as specified in this standard are intended for use in GV and SL structural bolting of steel channel sections in accordance with DIN 18 800 Part 1, together with DIN6914 bolts and DIN6915 nuts.
DIN
DIN 6912
1985
English

Hexagon socket thin head cap screws with pilot recess for wrench key

This standard specifies product grade A hexagon socket thin head cap screws with pilot recess for wrench key with ISO metric screw thread from M4 up to and including M36. If, in special cases, the screws are to meet requirements other than those given in this standard, e.g.with regard to propert...
MIL
MIL-DTL-25027H
1997
English

NUT, SELF-LOCKING, 250° F, 450° F, AND 800° F

This specification covers self-locking nuts for use in temperatures of 250° F, 450° F, and 800° F (see 6.1).
JIS
JIS B 0209-2
2001
English

ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality

This Standard specifies limits of sizes for pitch and crest diameters for ISO general purpose metric screw threads (M) conforming to JIS B 0205-3 having basic profile according to JIS B 0205-1. The limits of sizes for the tolerance quality specified are derived from the fundamental deviations an...
DIN
DIN 7975
1970
English

Tapping Screws – Application and Core Hole Diameters

Set out below are some guidelines for the application of tapping screws. The fastening methods shown are to be deemed as examples. Tapping screws of Type B with cone end (also known as seekers) are the type predominantly used. This applies particularly when several sheets have to be fastened and...