DIN 471

Circlips (retaining rings) for shafts – Normal type and heavy type

English 1981
0.000
DIN
Detailed Information

Circlips within the meaning of this standard are retaining rings for holding structural components (e.g. rolling bearings) on shafts. They are given an eccentric shape, are fitted with spring retention in grooves and are suitable for the transmission of axial forces.

Download File
(Log in to download spec.)

Check out other specifications

NASM
NASM 35649
2002
English

NUT, PLAIN, HEXAGON, MACHINE SCREW UNC-2B

MATERIAL: STEEL, CARBON, SHALL BE IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. STEEL, CORROSION RESISTANT, SERIES 302 THRU 305 (UNS S30200 THRU UNS S30500), AND TYPES 316 (UNS S31600), 317 (UNS S31700) AND 347 (UNS S34700), IN ACCORDANCE WITH PROCUREMENT SPECIFICATION. BRASS, ALLOY 462 (UNS C462...
ISO
ISO 7380-1
2011
English

Button head screws — Part 1: Hexagon socket button head screws

This International Standard specifies the characteristics of hexagon socket button head screws with threads from M3 up to and including M16, with product grade A and with reduced loadability according to Table 3. If, in special cases, specifications other than those listed in this International ...
DIN
DIN 125-1
1990
English

Product grade A washers with a hardness up to 250 HV designed for use with hexagon head bolts and nuts

This standard specifies requirements for product grade A washers with a hardness up to 250 HV, designed for use with bolts of properly class 8.8 or less. The preferred application of these washers is in product grades A and B hexagon head bolt/hexagon nut assemblies, with widths acoss flats as sp...
JIS
JIS B 0002-3
1998
English

Technical drawings—Screw threads and threaded parts—Part 3 : Simplified representation

This part of JIS B 0002 establishes rules for the simplified representation of threaded parts, with the exception of screw thread inserts, which are covered in JIS B 0002-2. This representation is applicable when it is not necessary to show the exact shape and details of the parts (see JIS B 0002...
ISO
ISO 7092
2000
English

Plain washers – Small series – Product grade A

This International Standard specifies the characteristics of small-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 36 mm inclusive.
DIN EN
DIN EN 28744
1992
English

Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744

This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,5 to 25 mm inclusive. The displaced material to each sid...