DIN 980
All-metal prevailing torque type hexagon nuts
English
1987
0.000
Detailed Information
This standard specifies requirements for M3 to M39 prevailing torque type hexagon nuts (all-metal nuts), assigned to product grade A for sizes up to M16, and to product grade B for sizes over M16.
Download File
(Log in to download spec.)
Check out other specifications
1983
English
Square weld nuts
The May 1970 edition of DIN 928 specified property class 8 with the suffix "weldable" for weld nuts. In the meantime, the proof loads for nuts in international specifications have been raised (see DIN ISO 898 Part 2), the nut heights also being recalculated (see DIN 970). It turned out to be imp...
1992
English
Full-length taper grooved pins (ISO 8744 : 1986) English version of DIN EN 28 744
This international Standard specifies the characteristics of full-length taper grooved pins which have three equally spaced grooves impressed longitudinally on their exterior surface, with metric dimensions and nominal diameter, d1, from 1,5 to 25 mm inclusive. The displaced material to each sid...
1986
English
Slotted capstan screws
Slotted capstan screws may be used both as fastening and adjusting screws. They are primarily designed for use in electrical engineering and may be tightened by means of a sliding tee bar where it is not possible to use a screwdriver. Locking wires are often attached to the cross holes for securi...
1983
English
Prevailing torque type hexagon nuts with flange and with non-metallic insert
This standard gives specifications for prevailing torque type hexagon nuts with flange and with non-metallic insert, with metric thread with diameters from 5 to 20 mm, assigned to product grade A. If, in special cases, nuts are to comply with specifications other than those given in this standar...
1992
English
ALLOY STEEL SOCKET BUTTON AND FLAT COUNTERSUNK HEAD CAP SCREWS [METRIC]
1.1 This specification covers the requirements for quenched and tempered alloy steel hexagon socket button (SBHCS) and flat countersunk (SFHCS) head cap screws M3 through M20 thread sizes having material properties of ISO 898/1 Property Class 12.9. 1.2 Fasteners meeting this specification are int...
1995
English
Tapping screws—Mechanical properties
This Japanese Industrial Standard specifies the characteristics of heat-treated steel tapping screws, with tapping screw thread from ST2.2 to ST8 inclusive in accordance with ISO 1478, together with the corresponding test methods.