This standard specifies M 6 to M 48 T·head bolts with square neck. They are designed for use in attaching components to foundations or similar structures by means of T·slots (such as are specified in DIN 649), where T·head bolts with square neck are considered adequate detachable fasteners.

These conditions of delivery apply to contact rivets according to DIN 46240 Sheet 2 with soldered-on or welded-on tip (at manufacturer's option) in contact materials which are not capable of being shaped by nonoutting methods, e.g. tungsten. Subject to agreement between manufacturer and user they...

1.1.1 This standard covers the complete dimensional and general data for two types, A and B, of metric series headless clevis pins intended for general applications and recognized as American National Standard. Type A headless clevis pins are without holes. Type B headless clevis pins specified...

This Japanese Industrial Standard specifies the steel square head set screws (hereafter referred to as "steel set screws") and stainless steel square head set screws (hereafter referred to as "stainless steel set screws") for general use.

This standard specifies dimensions and technical delivery conditions for screw plugs which are intended to be screwed into holes with parallel thread as specified in DIN 13 Part 5, 6 or 7, or ISO 228 Part 1. Such plugs may be used together with seal rings as specified in DIN 7603, type and materi...

ISO 4027 specifies product grade A hexagon socket set screws with cone points with metric dimension and thread diameters from 1,6 up to and including 24 mm.