2001
English
Weld nuts
This Japanese Industrial Standard specifies steel weld nuts (hereafter referred to as “nuts”) for general purpose. These nuts are used for projection welding or spot welding.
1994
English
Weld bolts
This Japanese Industrial Standard specifies steel weld bolts, hereafter referred to as "bolts", for general purpose. This bolt is intended to be projection-welded at its bearing surface side of head for service, but the bolt to be welded at the top surface of head for service is excluded.
2000
English
Hexagon socket countersunk head screws
This Standard specifies the characteristics of hexagon socket countersunk head screws with threads from M3 up to and including M20, of product grade A and property classes 8.8, 10.9 and 12.9. If, in special cases, specifications other than those listed in this Standard are required, they should ...
2005
English
Hexagon nuts with flange
This Standard specifies the characteristics of hexagon nuts with flange. If, in special cases, specifications other than those listed in this Standard are required, they should be selected from existing standards, for example JIS B 0205-2, JIS B 0209-2, JIS B 1052 and JIS B 1054-2. NOTES 1 Hex...
1999
English
Hexagon nuts with flange
This Japanese Industrial Standard has been prepared based on ISO 4161 Hexagon nuts with flange — Product grade A, issued as the first edition in 1983. The text of this Standard incorporates the technical contents of the corresponding International Standard without any changes. However, the Annex ...
2005
English
Hexagon flange bolts
This Japanese Industrial Standard has been prepared based on ISO 15071 Hexagon bolts with flange—Small series—Product grade A and ISO 15072 Hexagon bolts with flange with metric fine pitch thread—Small series—Product grade A published in 1999 as the first edition by editing and integrating the co...
1995
English
Cross recessed head screws with captive washer
This Japanese Industrial Standard specifies steel or brass made cross recessed head screws with captive washer for general purposes. The cross recessed head screw with captive washer is a screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent t...
1995
English
Hexagon head screws with captive washer
This Japanese Industrial Standard specifies steel and brass hexagon head screws with captive washer for general purposes. The hexagon head screw with captive washer is a hexagon head screw of which the threads are rolled after a washer has been assembled on the screw blank so as to prevent the di...
1995
English
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints
This Japanese Industrial Standard specifies the sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (Hereafter referred to as "sets") used mainly for steel structures.
1994
English
Wing nuts
This Japanese Industrial Standard specifies the metallic wing nuts {hereafter referred to as "nut"), for general use.
1994
English
Wing bolts
This Japanese Industrial Standard specifies the metallic wing bolts (hereafter referred to as "bolts"), for general use. Furthermore, these bolts have their heads (wing parts) firmly joined together with shanks by welding, caulking or other suitable methods, or those formed into one body.
2001
English
Domed cap nuts
This Japanese Industrial Standard specifies the steel domed cap nuts (hereafter referred to as “steel nuts”) , the stainless steel domed cap nuts (hereafter referred to as “stainless steel nuts”) , and the brass domed cap nuts (hereafter referred to as “brass nuts”), all for general use.
1995
English
Square head bolts
This Japanese Industrial Standard specifies the steel square head bolts for general use (hereafter, referred to as "bolts"). Further, the strength class column II (4T) of mechanical properties specified in this Standard will be abolished on April 1, 1999.
2004
English
Hexagon nuts and hexagon thin nuts
This Japanese Industrial Standard has been prepared based on the third edition of ISO 4032 : 1999 Hexagon nuts, style 1-Product grades A and B published in 1999, the second edition of ISO 4033 Hexagon nuts, style 2-Product grades A and B published in 1999, the third edition of ISO 4034 Hexagon nu...
2004
English
Hexagon head bolts and hexagon head screws
This Japanese Industrial Standard has been prepared based on the third edition of ISO 4014 : 1999 Hexagon head bolts—Product grades A and B published in 1999, the first edition of ISO 4015 : 1979 Hexagon head bolts—Product grade B—Reduced shank (shank diameter approximately equal to pitch diamete...
1994
English
Flat head bolts
This Japanese Industrial Standard specifies flat head bolts made of steel, hereafter referred to as "steel bolts", flat head bolts made of stainless steel, hereafter referred to as "stainless steel bolts" and flat head bolts made of brass, hereafter referred to as "brass bolts" for general use.
1994
English
Foundation bolts
This Japanese Industrial Standard specifies the steel foundation bolts for general use (hereafter, referred to as "bolts").
1997
English
Hexagon socket set screws
Introduction This Japanese Industrial Standard has been prepared based on ISO 4026, ISO 4027, ISO 4028 and ISO 4029 published in 1993 as the 2nd edition, without alteration in the technical contents with respect to the corresponding parts (quality, shape and dimensions). However, items which are ...
2000
English
Hexagon socket head cap screws
This Standard specifies the characteristics of hexagon socket head cap screws with threads from M1.6 up to and including M64 and product grade A. Gauging of hexagon sockets is specified in Annex A. For approximate masses of screws see Annex B. If, in special cases, specifications other than tho...
1988
English
Hexagon socket head shoulder screws
This Japanese Industrial Standard specifies the steel hexagon socket head shoulder screws used generally, hereinafter referred to as the "screws". However, the screws to be used for holding stripper of press dies may be in accordance with JIS B 5064, as required.