Showing 1 - 20 of 106
ISO
ISO 4759-2
1979
English

Tolerances for fasteners – Part II: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F, for fine mechanics

This International Standard specifies the selection of tolerances for use in the preparation of ISO product standards for bolts, screws and nuts with thread diameters from 1 up to and including [...]
ISO
ISO 4759-1
2000
English

Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C

This part of ISO 4759 specifies a selection of tolerances for bolts, screws, studs and nuts with ISO metric threads and with product grades A, B and C and for tapping screws with product grade [...]
ISO
ISO/R 2101
1971
English

ALUMINIUM AND ALUMINIUM ALLOYS – SHEAR TEST FOR RIVET WIRE AND RIVETS

This ISO Recommendation applies to the shear testing of aluminium and aluminium alloy rivet wire and rivets, having a diameter not greater than 10 mm (3/8 in).
ISO
ISO/R 1501
1970
English

ISO MINIATURE SCREW THREADS

This ISO Recommendation specifies ISO miniature screw threads with thread sizes from 0.3 to 1.4 mm diameter. For technological and functional reasons the tolerancing system for these threads d [...]
ISO
ISO/R 1051
1969
English

RIVET SHANK DIAMETERS (DIAMETER RANGE 1 TO 36 mm)

This ISO Recommendation tabulates diameters for the shanks of metal rivets for general use.
ISO
ISO 15071
1999
English

Hexagon bolts with flange — Small series — Product grade A

This International Standard specifies the characteristics of hexagon bolts with flange, small series, with product grade A, with threads from M5 up to and including M16 and property classes 8.8 [...]
ISO
ISO 14585
2001
English

Hexalobular socket pan head tapping screws

This International Standard specifies the characteristics of hexalobular socket pan head tapping screws with thread sizes from ST2,9 to ST6,3 inclusive.
ISO
ISO 14584
2001
English

Hexalobular socket raised countersunk head screws

This International Standard specifies the characteristics of hexalobular socket raised countersunk head screws in product grades A and with thread sizes from M2 to M10 inclusive.
ISO
ISO 14583
2001
English

Hexalobular socket pan head screws

This International Standard specifies the characteristics of hexalobular socket pan head screws in product grades A and with thread sizes from M2 up to and including M10.
ISO
ISO 14580
2001
English

Hexalobular socket cheese head screws

This International Standard specifies the characteristics of hexalobular socket cheese head screws in product grades A and with thread sizes from M2 up to and including M10.
ISO
ISO 14579
2001
English

Hexalobular socket head cap screws

This International Standard specifies the characteristics of hexalobular socket head cap screws with thread sizes from M2 up to and including M20, of product grade A.
ISO
ISO 13918
2008
English

Welding — Studs and ceramic ferrules for arc stud welding

This International Standard specifies: ⎯ requirements for studs and ceramic ferrules for arc stud welding; ⎯ dimensions, materials, mechanical properties and, when required, conditions of evalu [...]
ISO
ISO 12683
2004
English

Mechanically deposited coatings of zinc — Specification and test methods

This document specifies the requirements for coatings of zinc that have been mechanically deposited on to fabricated metal articles to protect them from corrosion. It also describes the related [...]
ISO
ISO 10683
2014
English

Fasteners — Non-electrolytically applied zinc flake coatings

This International Standard specifies requirements for non-electrolytically applied zinc flake coatings for steel fasteners. It applies to coatings: — with or without hexavalent chromium; — wit [...]
ISO
ISO 10664
2005
English

Hexalobular internal driving feature for bolts and screws

This International Standard specifies the shape and basic dimensions of the hexalobular internal driving feature for bolts and screws, including the gauging method. The curvature of the contou [...]
ISO
ISO 8992
1986
English

Fasteners — General requirements for bolts, screws, studs and nuts

This International Standard specifies the general requirements for standardized bolts, screws, studs and nuts; it complements the International Standards on dimensional and tolerance requiremen [...]
ISO
ISO 8765
1988
English

Hexagon head bolts with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head bolts with metric fine pitch thread with nominal thread diameters d from 8 to 64 mm of product grade A for nominal thread diame [...]
ISO
ISO 8734
1997
English

Parallel pins of hardened steel and martensitic stainless steel (Dowel pins)

This International Standard specifies the characteristics of parallel pins (dowel pins) of steel, through hardened or case hardened and martensitic stainless steel with nominal diameters, d, fr [...]
ISO
ISO 8677
1986
English

Cup head square neck bolts with large head – Product grade C

This International Standard specifies the characteristics of cup head square neck bolts with large head, with metric dimensions and thread sizes from M5 to M20 inclusive, of product grade C.
ISO
ISO 8676
1988
English

Hexagon head screws with metric fine pitch thread – Product grades A and B

This International Standard gives specifications for hexagon head screws with metric fine pitch thread with nominal thread diameters from 8 to 64 mm, of product grade A for nominal thread diame [...]
12...6